Optimize Life Span
Maximizing the useful life of your MTI product requires regular service checks.
- Perform regular calibrations
- Identify wear and tear issues earlier
- Optimize for peak performance
Reduce Down Time
Streamline the service process to reduce downtime.
- Avoid lengthy PO processes
- Shorten time with priority support
- Past service requests already on file
Maximize ROI
Save as much as 15% over out-of-warranty repair and next generation product costs.
- Ad-hoc service costs are more costly
- Quicker turnaround reduces downtime expense
- Discounts offered on next gen products
Choose a Plan
Right For You
Limited Time Offer
Purchase your plan by January 1st and lock in reduced rate pricing as long as you own the unit under continuous plan coverage. Have a different product? Submit a request here.
1510A Service Packages
Channel A | |
---|---|
Sine Wave Signal | |
Voltage range (0.1 Hz to 100 kHz) | 0 to 9.9999 V PEAK |
Voltage accuracy (10 mV to 10 V) | |
• 10 Hz to 20 Hz | 0.15% ±0.1 mV of setting |
• 20 Hz to 30 kHz | 0.05% ±0.1 mV of setting |
• 30 kHz to 50 kHz | 0.07% ±0.1 mV of setting |
• 50 kHz to 80 kHz | 0.08% ±0.1 mV of setting |
• 80 kHz to 100 kHz | 0.10% ±0.1 mV of setting |
Charge range (10 Hz to 100 kHz) | 1 to 9999.9 pC PEAK |
Charge accuracy (10 to 10000 pC) • 10 Hz to 30 kHz | 0.20% ±0.1 pC of setting |
Resolution | 0.1 mV or 0.1 pC |
Qualifier/rectifier type | RMS, PEAK or PK-PK |
Frequency range | 0.1 to 99999.9 Hz |
Distortion | |
• 10 Hz to 50 kHz | <0.5% |
• 50 kHz to 100 kHz | <3.0% |
Frequency accuracy | |
• 3 Hz to 100 kHz | ±0.005% of setting |
Variable phase (all Channel A wave signals) | 0 to 360° |
Square Wave Signal | |
Voltage range | 0 to 9.9999 V PEAK |
Charge range | 0 to 9999.9 pC PEAK |
Resolution | 0.1 mV or 0.1 pC |
Qualifier/rectifier type | RMS, PEAK or PK-PK |
Frequency range | 0.1 Hz to 20 kHz |
Frequency accuracy • 3 Hz to 100 kHz | ±0.005% of setting |
Rise/fall time (10 to 90%) | : ≤3.0 µs |
Asymmetry | <3% at 10 kHz |
Overshoot | <2% |
Accuracy | 0.1% typical, 0.25% maximum of setting |
Triangle Wave and Sawtooth Wave Signals | |
Voltage range | 0 to 9.9999 V PEAK |
Charge range | 0 to 9999.9 pC PEAK |
Resolution | 0.1 mV or 0.1 pC |
Qualifier/rectifier type | RMS, PEAK or PK-PK |
Frequency range | 0.1 Hz to 20 kHz |
Frequency accuracy • 3 Hz to 100 kHz | ±0.005% of setting |
Accuracy | 0.1% typical, 0.25% maximum of setting |
DC Output – Standard | |
Voltage range | ±9.9999 VDC |
Voltage accuracy | 0.05% ±0.1 mV of setting |
Resolution | 0.1 mV |
• The standard DC output can be generated alone or simultaneously with a wave signal (AC signal) in order to provide an offset. | |
DC Output – Microvolt | |
Voltage range | ±1 µV to ±99.999 mVDC |
Voltage accuracy | 0.05% ±5 µV of setting |
Resolution | 0.1 µV |
• The microvolt DC output is generated under closed-loop control in order to ensure accuracy. Microvolt accuracy is based on use of special RG58/U coaxial cable. At low microvolt signal levels, connector metal dissimilarities can cause false readings. | |
Connectors | |
Type | |
• CHAN A Volts | Channel A voltage signal. BNC connector (female). |
• CHAN A PC DE | Channel A charge signal – differential output. 3-pin MIL-C/DTL-5015 type connector (MS310x). |
• CHAN A PC SE | Channel A charge signal – single-ended output. Microdot 10-32 type connector. |
Impedance (connector) | 50 Ω |
Channel B | |
Sine Wave Signal | |
Voltage range (0.1 Hz to 100 kHz) | 0 to 9.9999 V PEAK |
Voltage accuracy (10 mV to 10 V) | |
• 10 Hz to 20 Hz | 0.15% ±0.1 mV of setting |
• 20 Hz to 30 kHz | 0.05% ±0.1 mV of setting |
• 30 kHz to 50 kHz | 0.07% ±0.1 mV of setting |
• 50 kHz to 80 kHz | 0.08% ±0.1 mV of setting |
• 80 kHz to 100 kHz | 0.10% ±0.1 mV of setting |
Resolution | 0.1 mV |
Qualifier/rectifier type | RMS, PEAK or PK-PK |
Frequency range | 0.1 to 99999.9 Hz. Note: Channel B frequency can also be configured as a ratio of the Channel A frequency. See Pulse (speed/ratio) function below. |
Distortion | |
• 10 Hz to 50 kHz | <0.75% |
• 50 kHz to 100 kHz | <3.0% |
Frequency accuracy • 3 Hz to 100 kHz | ±0.005% of setting |
Variable phase | 0 to 360° |
(all Channel B wave signals) | Channel B frequency can also be configured as a ratio of the Channel A frequency. See Pulse (speed/ratio) function below. |
• Channel B sine wave signal specifications are the same as for Channel A, except for distortion (10 Hz to 50 kHz) and that Channel B does not support a charge signal. | |
Square Wave Signal | |
Voltage range | 0 to 9.9999 V PEAK |
Resolution | 0.1 mV |
Qualifier/rectifier type | RMS, PEAK or PK-PK |
Frequency range | 0.1 Hz to 20 kHz |
Frequency accuracy • 3 Hz to 100 kHz | ±0.005% of setting |
Rise/fall time (10 to 90%) | ≤3.0 µs |
Asymmetry | <3% at 10 kHz |
Overshoot | <2% |
Accuracy | 0.1% typical, 0.25% maximum of setting |
• Channel B square wave signal specifications are the same as for Channel A except that Channel B does not support a charge signal. | |
Triangle Wave and Sawtooth Wave Signals | |
Voltage range | 0 to 9.9999 V PEAK |
Resolution | 0.1 mV |
Qualifier/rectifier type | RMS, PEAK or PK-PK |
Frequency range | 0.1 Hz to 20 kHz |
Frequency accuracy • 3 Hz to 100 kHz | ±0.005% of setting |
Accuracy | 0.1% typical, 0.25% maximum of setting |
• Channel B triangle wave and sawtooth wave signal specifications are the same as for Channel A except that Channel B does not support a charge signal | |
Pulse (speed/ratio) Function | |
Signal type | Sine, square, single pulse or odd pulse |
Voltage range | 0 to 9.9999 V PEAK |
Resolution | 0.1 mV |
Qualifier/rectifier type | RMS, PEAK or PK-PK |
Frequency range (ratio) | 0.1 to 100 times the Channel A frequency, in steps of 0.1 |
Single-pulse Function | |
Signal type | 1-cycle sine or ½-cycle square (TTL) |
Voltage range | 0 to 9.9999 V PEAK |
Resolution | 0.1 mV |
Qualifier/rectifier type | RMS, PEAK or PK-PK |
Pulse duty cycle | 3 to 100% |
Frequency range (fixed) | 1 Hz to 100 kHz |
Frequency range (ratio) | 0.1 to 100 times the Channel A frequency, in steps of 0.1 |
Odd-pulse Function | |
Signal type | Long (larger) or short (smaller) |
Signal size | 0 to 999% of base pulse |
Number of base pulses between odd pulse | 1 to 100 |
Voltage range | 0 to 9.9999 V PEAK |
Resolution | 0.1 mV |
Qualifier/rectifier type | RMS, PEAK or PK-PK |
Frequency range (fixed) | 1 to 99999.9 Hz |
Frequency range (ratio) | 0.1 to 100 times the Channel A frequency, in steps of 0.1 |
Sweep Function | |
Sweep time | 1 to 999 s (16.6 min) |
Sweep time step | 1 s |
Configurable options | Start frequency, stop frequency and sweep time |
User controls | Start (go), pause and cancel |
Channels | A alone or A and B together |
• Channel B is swept synchronously with Channel A if the Channel B frequency is configured as a ratio of the Channel A frequency. The phase between Channel A and Channel B is preserved during a sweep. | |
Connectors | |
Type | |
• CHAN B | Channel B voltage signal. BNC connector (female). |
Impedance (connector) | 50 Ω |
Electrical | |
Power source | Battery operated. Four rechargeable NiMH AA (LR6 / 15A) batteries. |
Operating time | Up to 6 hours. Note: Battery life varies depending upon the type of signals being generated and the loads that are being driven. |
Battery charger | 115/230 VAC, 50-60 Hz, 400 mA input. 9 VDC, 1.5 A output. |
Environmental | |
Temperature range | 0 to 50°C (32 to 122°F) Note: Specifications are stated at 25°C (77°F) under no-load conditions, after a 30 minute (minimum) warm-up time. |
Approvals | |
Conformity | CE marking, European Union (EU) declaration of conformity |
Environmental management | RoHS compliant (2002/95/EC) |
User Interface | |
Display | Backlit black and white LCD display. 4-lines of 18-characters (128 × 64 pixels). |
Controls | |
Keypad | 16-button spill-proof keypad: • 12 data entry keys (0-9, backspace, decimal separator, on/off). • 4 function (“soft”) keys that depend on the operating mode, defined by displayed prompts. |
Memory | 40-memory locations to save and recall settings. Note: Saving and recalling frequently used configurations reduces set-up time and can help to ensure consistency between tests. |
Connectors | |
Battery charger port | Used to recharge the internal NiMH batteries. |
The 1510A can also be continuously operated using power provided via this connector. | |
Communications port | Used to remotely control and program the 1510A using optional software. USB 1.0 Type-A receptacle (socket). |
Physical | |
Dimensions (height × width × depth) | 19 × 11 × 5.7 cm (7.5 × 4.25 × 2.25") |
Weight | 0.8 kg (1.8 lb) approx. |
PBS Service Packages
Sine Wave Signal | Channel A | Channel B |
---|---|---|
Voltage range (0.1 Hz to 100 kHz) | 0 to 9.9999 V PEAK | |
Loop connector range | 0-24 mA | — |
Voltage accuracy (of setting, 10 mV to 10 V) | ||
• 1 Hz to 20 Hz | 0.15% ±0.1 mV of setting | |
• 20 Hz to 30 kHz | 0.05% ±0.1 mV of setting | |
• 30 kHz to 50 kHz | 0.07% ±0.1 mV of setting | |
• 50 kHz to 80 kHz | 0.08% ±0.1 mV of setting | |
• 80 kHz to 100 kHz | 0.10% ±0.1 mV of setting | |
Charge range (10 Hz to 100 kHz) | 1 to 9999.9 pC PEAK | — |
Charge accuracy (10 to 10000 pC) • 10 Hz to 30 kHz | 0.20% ±0.1 pC of setting | — |
Resolution | 0.1 mV, 46 nA | |
Qualifier/Rectifier Type | RMS, PEAK or PK-PK | |
Frequency Range Channel B frequency can also be set and locked to any ratio of Channel A. Refer to Speed synthesizer specifications. | 0.1 to 99999.9 Hz | |
Distortion | ||
• 10 Hz to 50 kHz | <0.5% | <0.75% |
• 50 kHz to 100 kHz | <3.0% | |
Frequency accuracy | ||
• 3 Hz to 100 kHz | ±0.005% of setting | |
Variable phase (all waveform types) | 0 to 360° | |
Channel A phase on any waveform type can be synchronized and locked to Channel B phase, at any phase setting 0-360°, Step 1°. In Sweep mode, Channel A & Channel B can be swept together, preserving phase relationship. | ||
Square Wave Signal | Channel A | Channel B |
Voltage range | 0 to 9.9999 V PEAK | |
Loop connector range | 0-24 mA | — |
Charge range | 1 to 9999.9 pC PEAK | |
Resolution | 0.1 mV or 0.1 pC | |
Level types | RMS, PEAK or PK-PK | |
Frequency range | 0.1 Hz to 20 kHz | |
Frequency accuracy • 3 Hz to 100 kHz | ±0.005% of setting | |
Rise/fall time (10 to 90%) | ≤3.0 µs | |
Asymmetry | <3% at 10 kHz | |
Overshoot | <2% | |
Voltage accuracy (of setting) | 0.1% typical, 0.25% max | |
Triangle Wave and Sawtooth Wave Signals | Channel A | Channel B |
Voltage range | 0 to 9.9999 V PEAK | |
Loop connector range | 0-24 mA | — |
Charge range | 1 to 9999.9 pC PEAK | |
Resolution | 0.1 mV or 0.1 nC | |
Level types | RMS, PEAK or PEAK-PEAK | |
Frequency range | 0.1 Hz - 20,000 Hz | |
Frequency accuracy • 3 Hz to 100 kHz | ±0.005% of setting | |
Voltage accuracy | 0.1% typical, 0.25% maximum of setting | |
Output connectors | Channel A | Channel B |
Impedance | 50 Ω | |
Connector | BNC coaxial | |
Differential charge (DE) | MS3102A-10SL-3P | — |
Single-ended charge (SE) | RMS, peak or pk-pk units | — |
DC Output (and DC offset) | Channel A | Channel B |
Voltage range | ±9.9999 VDC | — |
Voltage accuracy | 0.05% ±0.1 mV of setting | — |
Resolution | 0.1 mV | — |
DC voltage can be generated alone or simultaneously with AC signal to simulate offsets. | ||
Microvolt DC output - Bridge mode | Channel A | Channel B |
Voltage range | ±1 µV to ±99.999 mVDC | — |
Voltage accuracy | 0.05% ±5 µV of setting | — |
Resolution | 0.1 µV | — |
To ensure accuracy for testing of strain gage and other low level bridge circuits. | ||
Channel B - Speed Synthesizers Signals Ratio Speed Signal Function | ||
Single Pulse Signal Function | ||
Signal Type | 1-cycle sine or 1⁄2 cycle square/TTL) | |
Signal Range | 0 to 9.9999 Volts Pk | |
Resolution | 0.1 mV | |
Pulse Duty Cycle | 3% to 100% | |
Frequency Range (ratio) | 0.1x to 100x Ch A Frequency Step 0.1 | |
Frequency Range (fixed) | 1 Hz to 100kHz | |
Units | RMS, peak or pk-pk | |
Odd Pulse Signal Function | ||
Odd Pulse Type | Long or short | |
Odd Pulse Size | 0 to 9.9999 Volts Pk | |
Number or base pulses between odd pulse | 0.1 mV | |
Frequency range (ratio) | 3% to 100% | |
Frequency range (fixed) | 0.1x to 100x Ch A Frequency Step 0.1 | |
Range | 1 Hz to 100kHz | |
Resolution | .01 mV | |
Voltage units | RMS, peak or pk-pk | |
Waveform | Sine Wave | |
Sweep Functions (Channels A & B) | ||
Sweep time | 1 + 999 sec (116.67 min) | |
Sweep time sec | 1 Second | |
User Controls | Set START Frequency Set STOP Frequency Set SWEEP time (seconds) GO PAUSE CANCEL | |
Channels | A alone or A & B together | |
Channel B can be swept synchronously with Channel A, if Channel B frequency is set to any Ratio of Channel A Frequency. Phase between Channel A and Channel B is preserved during sweep. |