Laboratory grade accuracy, WiFi connectivity, Ruggedly built.
Get proven reliability, performance, and remote operation in a portable signal simulator for testing and calibrating sensor-driven systems.
The 1520 Precision Signal Simulator is a NIST-traceable signal source for testing and calibrating sensor-driven systems. This portable and easy-to-use system lets technicians bring laboratory-grade precision into the field or onto the factory floor or flightline. Applications include accelerometers, flow meters, pressure transducers, tachometer generators, and microphones. An intelligent sensor database lets operators simulate a wide variety of sensor types and build custom simulations using SQL queries.
MTI’s 1520 Precision Signal Simulator is Made in the USA and combines a rugged and ergonomic design with a battery that supports all-day use. This field-upgradable unit supports software updates along with additional sensors and features. Importantly, this WiFi-enabled device can be remotely controlled via a smartphone so that a single technician can perform troubleshooting and diagnostics. Technicians like its intuitive user interface and appreciate that its touchscreen is easy-to-use with a gloved hand.
- Portable and Rugged – The 1520 features a rugged, but ergonomic, design that lets you bring laboratory-grade precision into the field.
- Signals – Dual Voltage, Single Current Loop, and Single Charge Mode in both Single Ended and Differential Forms.
- Waveforms – Custom, Sine, Square, Triangle, Pulse, Tachometer, and Sawtooth from 0.1Hz to 100kHz n 0.1 Hz increments.
- Jog Function – Vary the signal amplitude in increments to determine system gain, or vary the signal frequency to determine filter response.
- Sweep Function – Customizable time, voltage or charge.
- Bridge Circuit Simulation – Easily command microvolts to simulate strain gauges.
- High Accuracy – Voltage and charge signals with accuracies to 0.05%.
- Versatility – Build your own applications using common SQL queries.
- Light and dark modes to accommodate user preference and lighting conditions.
- Languages supported: English; additional languages coming soon.
- UI designed with color vision deficiency users in mind.
- A/B channels are color mapped for ease-of-use.
- Annual calibration plans available to help meet NIST regulatory requirements.
WiFi Capability Provides
- Securely connect to your internal network and open the web page interface of the 1520 on any Internet-enabled device.
- Remotely login and control the full functionality of the 1520 for fast and easy testing of hard to reach sensors and devices.
- Cabling and wiring troubleshooting
- Audio signal simulation
- Vibration signal simulation – accelerometers and velocity probes
- Machinery speed signal simulation
- Low-voltage bridge sensor signal simulation
- Calibration of:
- Monitoring systems
- Charge amplifiers
- Avionics equipment
| Sine Wave Signal | Channel A | Channel B |
|---|---|---|
| Voltage range (0.1 Hz to 100 kHz) | 0 to 9.9999 V PEAK | |
| Loop connector range | 0-24 mA | — |
| Voltage accuracy (of setting, 10 mV to 10 V) | ||
| • 1 Hz to 20 Hz | 0.15% ±0.1 mV of setting | |
| • 20 Hz to 30 kHz | 0.05% ±0.1 mV of setting | |
| • 30 kHz to 50 kHz | 0.07% ±0.1 mV of setting | |
| • 50 kHz to 80 kHz | 0.08% ±0.1 mV of setting | |
| • 80 kHz to 100 kHz | 0.10% ±0.1 mV of setting | |
| Charge range (10 Hz to 100 kHz) | 1 to 9999.9 pC PEAK | — |
| Charge accuracy (10 to 10000 pC) • 10 Hz to 30 kHz | 0.20% ±0.1 pC of setting | — |
| Resolution | 0.1 mV, 46 nA | |
| Qualifier/Rectifier Type | RMS, PEAK or PK-PK | |
| Frequency Range Channel B frequency can also be set and locked to any ratio of Channel A. Refer to Speed synthesizer specifications. | 0.1 to 99999.9 Hz | |
| Distortion | ||
| • 10 Hz to 50 kHz | <0.5% | <0.75% |
| • 50 kHz to 100 kHz | <3.0% | |
| Frequency accuracy | ||
| • 3 Hz to 100 kHz | ±0.005% of setting | |
| Variable phase (all waveform types) | 0 to 360° | |
| Channel A phase on any waveform type can be synchronized and locked to Channel B phase, at any phase setting 0-360°, Step 1°. In Sweep mode, Channel A & Channel B can be swept together, preserving phase relationship. |
||
| Square Wave Signal | Channel A | Channel B |
| Voltage range | 0 to 9.9999 V PEAK | |
| Loop connector range | 0-24 mA | — |
| Charge range | 1 to 9999.9 pC PEAK | |
| Resolution | 0.1 mV or 0.1 pC | |
| Level types | RMS, PEAK or PK-PK | |
| Frequency range | 0.1 Hz to 20 kHz | |
| Frequency accuracy • 3 Hz to 100 kHz | ±0.005% of setting | |
| Rise/fall time (10 to 90%) | ≤3.0 µs | |
| Asymmetry | <3% at 10 kHz | |
| Overshoot | <2% | |
| Voltage accuracy (of setting) | 0.1% typical, 0.25% max | |
| Triangle Wave and Sawtooth Wave Signals | Channel A | Channel B |
| Voltage range | 0 to 9.9999 V PEAK | |
| Loop connector range | 0-24 mA | — |
| Charge range | 1 to 9999.9 pC PEAK | |
| Resolution | 0.1 mV or 0.1 nC | |
| Level types | RMS, PEAK or PEAK-PEAK | |
| Frequency range | 0.1 Hz - 20,000 Hz | |
| Frequency accuracy • 3 Hz to 100 kHz | ±0.005% of setting | |
| Voltage accuracy | 0.1% typical, 0.25% maximum of setting | |
| Output connectors | Channel A | Channel B |
| Impedance | 50 Ω | |
| Connector | BNC coaxial | |
| Differential charge (DE) | MS3102A-10SL-3P | — |
| Single-ended charge (SE) | RMS, peak or pk-pk units | — |
| DC Output (and DC offset) | Channel A | Channel B |
| Voltage range | ±9.9999 VDC | — |
| Voltage accuracy | 0.05% ±0.1 mV of setting | — |
| Resolution | 0.1 mV | — |
| DC voltage can be generated alone or simultaneously with AC signal to simulate offsets. | ||
| Microvolt DC output - Bridge mode | Channel A | Channel B |
| Voltage range | ±1 µV to ±99.999 mVDC | — |
| Voltage accuracy | 0.05% ±5 µV of setting | — |
| Resolution | 0.1 µV | — |
| To ensure accuracy for testing of strain gage and other low level bridge circuits. | ||
| Channel B - Speed Synthesizers Signals Ratio Speed Signal Function |
||
| Single Pulse Signal Function | ||
| Signal Type | 1-cycle sine or 1⁄2 cycle square/TTL) | |
| Signal Range | 0 to 9.9999 Volts Pk | |
| Resolution | 0.1 mV | |
| Pulse Duty Cycle | 3% to 100% | |
| Frequency Range (ratio) | 0.1x to 100x Ch A Frequency Step 0.1 |
|
| Frequency Range (fixed) | 1 Hz to 100kHz | |
| Units | RMS, peak or pk-pk | |
| Odd Pulse Signal Function | ||
| Odd Pulse Type | Long or short | |
| Odd Pulse Size | 0 to 9.9999 Volts Pk | |
| Number or base pulses between odd pulse | 0.1 mV | |
| Frequency range (ratio) | 3% to 100% | |
| Frequency range (fixed) | 0.1x to 100x Ch A Frequency Step 0.1 |
|
| Range | 1 Hz to 100kHz | |
| Resolution | .01 mV | |
| Voltage units | RMS, peak or pk-pk | |
| Waveform | Sine Wave | |
| Sweep Functions (Channels A & B) | ||
| Sweep time | 1 + 999 sec (116.67 min) | |
| Sweep time sec | 1 Second | |
| User Controls | Set START Frequency Set STOP Frequency Set SWEEP time (seconds) GO PAUSE CANCEL |
|
| Channels | A alone or A & B together | |
| Channel B can be swept synchronously with Channel A, if Channel B frequency is set to any Ratio of Channel A Frequency. Phase between Channel A and Channel B is preserved during sweep. |
||
| Environmental Characteristics | |
|---|---|
| Operating temperature | -10°C to+ 60°C (+14°F to +140°F) |
| Power | |
| Power source | External charger operates from 115/230VAC, 50-60Hz up to 36W |
| Battery | Rechargeable, Lithium Ion battery. Non-removable. |
| Battery life | 8 hours (typical) from full charge (dependent on use of the display/back-light, and wireless) |
| Connector/Charger type | USB-C (PD2.0) |
| Controls | |
| User display | 320x240 TFT Color Resistive Touchscreen, Glove Compatible Color transflective LCD white back-light |
| Connectivity | USB-C, WiFi, Bluetooth |
| Key pad input | Directional and numeric with power and function keys. |
| Set-up memory | 100 locations to save settings for all outputs and functions |
| Memories (non-volatile) | Save program setups - any combination of instrument settings |
| Physical | |
| Case | Molded plastic |
| Grips | Molded rubber |
| Connections (outputs) | Standard BNC (±10V Voltage), Banana (4-20mA Current), 10-32 Coaxial (Single Ended Charge), MS3102A-10SL-3P (Differential Charge) |
| Connections (inputs) | USB-C Power supply, PC and Network Interface |
| Dimensions (height × width × depth) | 257 L× 155.2 W × 55.9 H mm (10.12 L × 6.11 W × 2.22 H in) |
| Weight | Approximately 1 kg (2.2 lbs), excludes interface cables/connectors/charger |
How Companies Use Portable Signal Generators and Calibrators
- Calibrating monitoring systems
- Calibrating charge amplifiers
- Calibrating avionics equipment
- Cable testing
- Wire testing
- Machinery speed signal simulation
- Data acquisition systems testing
- Gas turbine instruments testing
- Bridge circuit simulation
- Correlating new equipment
- Instrument calibration
- Sensor diagnosis
- Vibration signal simulation
- Audio signal simulation
- Simulating transducer
About MTI Instruments
MTI Instruments is a US-based, leading provider of non-contact physical measurement tools and condition-based monitoring systems. Precision is our passion. We are ISO 9001:2015-certified.
Clients Who Trust MTI
About MTI Instruments
MTI Instruments is a US-based, leading provider of non-contact physical measurement tools and condition-based monitoring systems. Precision is our passion. We are ISO 9001:2015-certified. Visit our website.
Clients Who Trust MTI
